Rotating Lifting Points (LBG-M08–LBG-M48)

Available on request

Rotating Lifting Points in 13 sizes, 0.3–20 ton WLL.

Specifications

Working load limit	0.3–20 ton
Sizes tabulated	13

Missing a spec? It's available on request — send us your requirement.

13 sizes available. Quote by part number, or send us the load and we'll size it.

Rotating Lifting Points (LBG-M08–LBG-M48) — sizes and part numbers
Part no.	WLL(ton)	A(mm)	B(mm)	C(mm)	D(mm)	E(mm)	F(mm)	G(mm)	H(mm)	M(mm)	Torque(nm)	Weight(kg)
LBG-M08	0.3	30	54	34	35	40	10.0	29	11	8	30	0.30
LBG-M10	0.63	30	54	34	36	39	10.0	29	16	10	60	0.32
LBG-M12	1.0	32	54	34	37	38	10.0	29	21	12	100	0.33
LBG-M16	1.5	33	56	36	46	39	13.5	36	24	16	150	0.55
LBG-M20	2.5	50	82	54	55	55	16.5	43	32	20	250	1.30
LBG-M24	4.0	50	82	54	58	66	18.0	43	37	24	350	1.50
LBG-M27	4.0	60	103	65	78	69	22.5	61	39	27	400	3.10
LBG-M30	5.0	60	103	65	80	67	22.5	61	49	30	500	3.10
LBG-M36-07	7.0	60	103	65	72	74	22.5	55	52	36	700	3.30
LBG-M36-08	8.0	77	122	82	100	97	26.5	77	63	36	800	5.80
LBG-M42-10	10.0	75	145	80	103	64	30x20	77	73	42	1000	6.40
LBG-M42-15	15.0	95	156	100	113	110	36.0	87	63	42	1500	11.20
LBG-M48	20.0	95	156	100	117	105	36.0	87	73	48	2000	11.20

Scroll the table sideways for all 13 columns.

The material construction to which the lifting point will be attached, should be of adequate strength to withstand forces during lifting without deformation. RUD, with reference to the German testing authority BG, recommends the following minimum for bolt lengths:
• 1.5 x M in steel (minimum quality S235JR)
• 1.5 x M in cast iron (for example GG 25)
• 2 x M in aluminium alloys
• 2.5 x M in aluminium-magnesium alloys
• (M = diameter of RUD lifting point bolt, e.g. M 20)

Send specs, photos, drawings, or inspection and testing requests. Your reply comes from the branch that will do the work.