Crosby lifting clamps — For lifting in any direction

Scroll the table sideways for all 12 columns.

• Other IP Crosby items on request.
• Ask for separate catalog.
• Available in capacities of 0.5 thru 30 metric tonnes (Higher WLL and jaw openings are available upon request).
• Wide variety of jaw openings available: 0 to 155mm | 0” - 6.13”.
• Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
• Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body.
• Full 180° turning range for material transfer, turning or moving.
• Lock open, lock closed ability with latch for pretension on material and then release of material.
• Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook.
• Minimum WLL of 10% of Maximum WLL.
• Maintenance replacement kits are available.
• All sizes are RFID EQUIPPED.
• The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side loading the clamp. The IPU10 lifting clamps with a WLL of 12t and up are fitted with special hook-up facilities to enable easy placement of the clamp in horizontal position.